BUTURE VC50 - Cordless Vacuum Cleaner Manual

WARNING

Thank you for purchasing the BUTURE VC50 cordless vacuum cleaner. Before using this machine, please read the following safety warning first and take safety protection measures to avoid malfunctions caused by improper operation.

1. This BuTure appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction by a responsible person concerning use of the appliance to ensure that they can use it safety.
2. Suitable for dry locations only. Do not use or store outdoors with wet surfaces. Do not handle any part of the plug or appliance with wet hands. Store properly in a dry place indoors.
3. Do not use a damaged cable or plug. If the device or charger does not work properly, dropped, damaged, missed or dropped into water, please contact tech-support@ibuture.com, BuTure after-sales team for support.
4. Do not vacuum flammable or combustible liquids, such as petrol, or use in areas where liquids may be present.
5. Turn off the power switch before plug or unplug the adapter.
6. Do not vacuum anything that is burning or smoking, such as cigarettes, matches or hot ashes.
7. Do not use without filters or dust cup to avoid damaging the motor and contaminating the air. Wash hands after using the vacuum cleaner.
8. 
   Do not place this product on or near a cooker or any other hot surface and do not incinerate this appliance even if it is severely damaged. The battery might catch fire or explode.
9. Unplug the charger from the power outlet before performing routine cleaning or maintenance.
10. Battery leaks may occur under extreme conditions. If any liquid gets on your skin wash quickly with soap and water. f liquid gets into your eyes, rinse with water for at least 15 minutes immediately. Seek medical attention immediately.
11. Charge the unit with the charger we provided.
12. Avoid using this product to vacuum hard, sharp objects, as this may cause damage.

Note: The vacuum cleaner adopted thermal protection technology to prevent overheating, will stop working when the item is over-heated.

PACKAGE LIST

Please check and confirm the accessories and parts according to the following sheet before using.

KNOW THE PRODUCT

Product Details

Digital Touch Screen

Accessories Function

2 in 1 Upholstery Brush
Easy to snap-on design, can help you remove dust and hair on the carpet.

Mini Cleaning Brush
Remove hair, rubbish, and micro dust on the accessories or filters.

Long Crevice Nozzle
Remove dust on the hard-to-reach areas like windows, bed feet, gaps between sofa, etc.

Charging Wall Mount
Fix the vacuum cleaner and accessories on the wall hanger for easy storage and charging.

PRODUCT ASSEMBLY

Install the Device

Install the Machine

1. Directly Install Cleaning Accessories
   
2. Install Extension Tube & Cleaning Accessories
   

Charging Wall Mount Installation

• Please make sure there is no gas, water, or electrical cables and wires behind the mounting area.
• To avoid the dock dropping down, please make sure it must be installed firmly.
• Store appropriately indoors in a dry place. Do not expose the machine to sunlight or freezing temperature. Recommended temperature range: 39.2°F (4°C)-104°F(40°C).

HOW TO USE

Charging

• When using a new battery or using it for the first time after long-term storage, please fully charge the battery first.
• When storing and not using the vacuum cleaner for a long time, please ensure that it is charged and discharged at least once every three months.

Charging Methods

1. Charge the battery directly
   
2. Charging with Wall Mount
   

Battery power indicator

Charging: Light will flash blue cyclically and indicate the remaining power.
Full Charge: Light will always on.

Operating

Before each use, make sure that

• The battery is fully charged, and fixed in place.
• The dust cup and filters are cleaned, and fixed in place.

Start To Work

Press the switch button to turn it on and it will start MANUAL Mode.

Select Cleaning Mode

1. MANUAL Mode
   Touch the "M" on the display screen to switch between three suction gears of MIN-MID-MAX. The corresponding indicator of suction level is: MIN= blue, MID= purple, MAX= red.
   
2. AUTO Mode
   Press the "A" button to switch to AUTO mode.
   In AUTO mode, the Automatic Load Sensor system automatically changes the motor speed and suction level between carpets and hard floors for energyefficient powerful cleaning.
   
   Blue Light: AUTO mode on
   White Light: AUTO mode of
3. Abnormal Indicator
   When the red light flashing (about 5s) and the motorized floor brush does not work, the motorized floor brush/telescopic tube/dust cup is blocked, please clean it promptly.
   

MAINTENANCE

Tip: Please clean the vacuum cleaner regularly to extend its lifespan.

Main Body Cleaning

• Turn off the power before cleaning the body.
• Please use a neutral detergent, wipe the body with half-wet cloth.
  
• Please avoid sun exposure and store in a cool and dry place.

Wash Dust Cup and Filters

1. Empty Dust Cup

• When using, if the garbage in the dust cup exceeds MAX Line, please empty it in time.
  
• Press the dust empty button to empty the dust.
  

2. Remove Dust Cup and Filters

• Remove Dust Cup and Filters Remove dust cup from main body.
  
• Rotate clockwise to remove the stainless steel filter.
  
• Remove HEPA filter from main body.
  

3. Clean and install dust cup/Filters

• Clean dust cup and filters with water. Make sure that the dust cup and filters have dried before use.
  
• Installation steps:

1. Twist the stainless steel filter counterclockwise and put it into the dust cup.
   
2. Put in a sponge strainer.
   
3. Plug the HEPA filter into the motor.
   
4. Twist the dust cup clockwise to connect it to the motor.
   

Brush Roller Cleaning

Tip: After long periods of use, the bristle may be jammed by hair or similar build-up. It's recommended to clean the brush roller periodically to ensure efficient operation and maintain suction.

1. Press the release button upwards to remove the brush roller.
   
2. To take out the brush roller, and to remove any hair or fibers that have been wrapped around the brush roller. Using the brush cleaning tool to sweep away the trash on the roller.
   
3. The brush roller is washable. Before replacing, check that the brush roller is completely dry.
   
4. Press the brush roller to the brush head and hearing the sounds of locking.
   

SPECIFICATION

TROUBLESHOOTING

NOTE: If vacuum still does not operate properly, contact Customer Service.

tech-support@ibuture.com

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download BUTURE VC50 - Cordless Vacuum Cleaner Manual