Table of Contents
Advertisement
Programme pack-
ages
Favourite pro-
grammes
Sort programmes
Moving pro-
grammes
Prog. colour al-
location
Expert code
The selection of programmes can be expanded by activating single
programmes from the target group programme packages.
The programmes selected from the programme packages (marked in
orange) are displayed during programme selection.
After switching on, you can also select a programme via: Favour-
ites.
24 programmes can be stored as favourites based on your own pri-
orities and requirements.
These favourites will also be made available in the control options
- Launderette logo
- Launderette, basic.
You can specify the control option under
Tip: You can assign a separate coloured frame to each programme. In
this case, the Prog. colour allocation setting must be set to On.
Changing favourite programmes
Select the programme you wish to change or replace.
Confirm the programme or the setting to be changed.
Another menu opens, enabling you to select a new programme or
change the parameters.
Confirm by touching the
Your selection is now active.
Programmes can be moved within the programme list and in the fa-
vourites list.
Factory default: off
Touch the selection area for the programme you want to move.
Press and hold the selection area until the frame changes.
Drag the programme to the required place.
You can assign a frame to a favourite programme. In the list of fa-
vourites, each favourite programme is given a coloured frame, which
can be adjusted.
Factory default: on
A code has to be entered to cancel a disinfection programme. The
code can be modified.
The expert code is not the same as the supervisor level code.
The code is: 0 0 0
Make a note of your new code if you ever change it.
Controls
Save
selection area.
Supervisor level
.
71
Advertisement
Table of Contents
