Table of Contents
Advertisement
Supervisor level
Time
Date
Volume
Visibility paramet-
ers
Appliance off
status
68
After selecting the clock format, you can set the time of day.
Time format
- 24 h clock
- 12 h clock
- No clock
Set
- The time can be set.
The date can be set after selecting the date format.
Date format
- DD.MM.YYYY
- YYYY.MM.DD
- MM.DD.YYYY
Date
- The date can be set.
The volume for various sounds can be changed.
- Finish tone
- Keypad tone
- Welcome tone
It can be set to one of 7 different levels or switched off altogether.
- Fault tone
The fault tone can be activated or deactivated.
Various parameters, such as the temperature, spin speed, Extras,
etc., are displayed when a programme is selected. You can decide
which parameters should not be displayed. The parameters cannot
be changed/are no longer displayed.
Factory default: all parameters are visible (marked in orange)
In order to save energy, the washing machine can be set to switch
to standby mode automatically after the end of the programme or if
no further selection is made. In the default setting, the machine will
not switch to standby mode automatically.
Changing this setting leads to increased energy consumption.
- No switch-off (factory default)
- Switch-off after 15 minutes
- Switch-off after 20 minutes
- Switch-off after 30 minutes
Advertisement
Table of Contents
