Programme Packages; Sort Programmes; Prog. Colour Allocation; Hygiene - Miele PWM 912 Operating And Installation Instructions

Programme
packages

Sort programmes

Moving
programmes
Prog. colour
allocation

Hygiene

Expert code

The selection of programmes can be expanded by activating single
programmes from the target group programme packages.
The programmes selected from the programme packages (marked in
orange) are displayed during programme selection.
Programmes can be moved within the programme list and in the
Favourites list.
Factory default: Off
Touch the sensor control for the programme you want to move.

Press and hold the sensor until the frame changes.

Drag the programme to the required position.

You can assign a colour to a Favourite programme. In the Favourites
list, each Favourite programme is given a coloured frame, which can
be adjusted.
Factory default: On
If a programme at a temperature below 60°C has been used, the
prompt to start the
in the display.
Factory default: Off
A code needs to be entered to cancel a disinfection programme. The
code can be changed.
The code is: 0 0 0
Make a note of your new code if you ever change it.
Maintenance wash hygiene
Supervisor level
programme will appear
59