Table of Contents
Advertisement
Cleaning and care
Cleaning the fil-
ters in the water
intake valves
52
Remove the rubber seal (1) from the recess.
Using pointed pliers, take hold of the plastic filter bar (2) and re-
move it.
Clean the plastic filter.
Reassemble in reverse order.
Turn on the stopcock and check the connection is watertight. If wa-
ter drips out, tighten the connection.
Using pliers, carefully loosen the ribbed plastic nut on the intake
valve and unscrew.
Use pointed pliers to withdraw the filter by the bar and clean it. Re-
assemble in reverse order.
The filters must be reinserted after cleaning.
Advertisement
Table of Contents
