Table of Contents
Advertisement
After successfully connecting with the outdoor sensor, the weather station can display the outdoor
temperature/humidity and the temperature/humidity trend (outdoor)
You may see the following displays:
The temperature/humidity is rising.
The temperature/humidity is remaining constant.
The temperature/humidity is falling.
RF Transmission Procedure:
The weather station automatically starts receiving transmission from outdoor thermo sensor for outdoor temperature
& humidity after batteries inserted.
The outdoor sensor will automatically transmit temperature and humidity signal to the Weather Station after batteries
inserted.
If Weather Station failed to receive transmission from outdoor sensor ("- -"display on the LCD), press and hold "-"
button for 3 seconds to receive transmission manually. RF icon "
the outdoor sensor.
Maximum/Minimum Temperature/Relative Humidity
To toggle indoor/outdoor maximum, minimum temperature and humidity data, press the "MEM" button:
Once to show the maximum temperature and humidity values.
Twice to sow the minimum temperature and humidity values
Three times to return to the current temperature and humidity levels
To reset the maximum and minimum temperature and humidity, press and hold down the "MEM" button about 2
seconds. This will reset all minimum and maximum data recorded to the current displayed values.
F.Y.I.:
If the temperature reading is below ranges, the LL.L will be displayed. If the temperature reading is above ranges, the
HH.H will be displayed.
Outdoor Temperature alert setting
Press and hold down the "
The icon of Upper limit of the Temperature alarm starts to flash. Use the "+" and "-" buttons to set the required
WS6210 User Manual
" button for 2 seconds until the icon for the Temperature Alert" starts to flash
" flashes on the LCD， The Weather Station to receive
Advertisement
Table of Contents
