Garmin Fishfinder 240 Owner's Manual page 14

www.reelschematic.com
www.reelschematic.com
Installation
Installing the Wiring Harness
Power/Data
Connection
Connecting a Transducer to Multiple Sensors
6
Speed Temp Transducer
Wiring Harness Installation (continued)
If your boat does not have a fuse block, the unit can be wired directly
to the battery. Make sure the 2-Amp in-line fuse supplied with the unit
is installed.
The Fishfi nder 240 can be connected to another piece of NMEA com-
patible electronic equipment. If equipped with a capable transducer, the
Fishfi nder 240 sends depth, temperature and speed information that could
be displayed on another device.