National Instruments PCI/PXI-781 R Series Getting Started page 10

g. On the block diagram, right-click the Open FPGA VI Reference function and select
Configure Open FPGA VI Reference from the shortcut menu.
h. In the Configure Open FPGA VI Reference dialog box, click the Browse Project button by
the Open»VI field to open the Select VI dialog box.
i. In the Select VI dialog box, select Analog Input (FPGA).vi in the new target and click OK.
j. Click OK in the Configure Open FPGA VI Reference dialog box.
Note (LabVIEW version 8.5.1 and earlier)
Configure Open FPGA VI Reference dialog to update the FPGA target in the host VI. For LabVIEW
version 8.5.1 and earlier, right-click the Open FPGA VI Reference function on the block diagram
and choose Select VI from the shortcut menu. In the Select VI dialog box, select Analog Input
(FPGA).vi in the new target and click OK.
In the Project Explorer window, right-click the original FPGA target and select Remove to
k.
delete it from the project.
l. Save the project to a new directory by selecting File»Save As.
6. Click the Run button in Analog Input (Host).vi to run the VI. The host VI displays the data being
acquired by the R Series device. To view real-world data, wire a signal source or voltage source to
AI0+ (RMIO pin 68) and AI0– (RMIO pin 34) of the terminal block.
© National Instruments Corporation
LabVIEW versions 8.5.1 and earlier do not use the
9 Getting Started with R Series Multifunction RIO