1
1. Water detection switch coupler
5.
Unscrew the filter cup from the filter
housing. NOTICE: Be careful not to
twist the water detection switch lead
when unscrewing the filter cup.
[ECM01960]
1
2
1. Filter cup
2. Water detection switch lead
6.
Drain the water in the filter cup by soak-
ing it up with a rag.
7.
Firmly screw the filter cup onto the filter
housing. NOTICE: Be careful not to
twist the water detection switch lead
when screwing the filter cup onto the
filter housing.
8.
Connect the water detection switch cou-
pler securely until a click is heard.
ZMU05476
ZMU05477
[ECM01970]
Trouble Recovery
1
1. Water detection switch coupler
9.
Fasten the water detection switch lead
with the plastic tie.
1
1. Plastic tie
10. Install the top cowling.
11. Start the engine and make sure that the
water separator-alert indicator remains
off. Have a Yamaha dealer inspect the
outboard motor after returning to port.
F40G, F70A
1.
Stop the engine.
2.
Remove the top cowling.
3.
Remove the cover.
ZMU05509
ZMU05475
99