Table of Contents
Advertisement
USING THE PROJECTOR
‡
Color Gamut: Select this menu to optomize the color gamut color range for Native, HDTV,
Presentation, Cinema, and Game.
‡
CMS: Select the following options:
±
Color: Select one of the colors (R/G/B/C/Y/M/W) to adjust its x/y offset and brightness.
±
x Offset: Adjust the x offset value of selected color.
±
y Offset: Adjust the y offset value of selected color.
±
Brightness: Adjust the brightness value of selected color.
±
Reset: Choose "Yes" to return the factory default settings for color adjustments.
±
Exit: Exit the "CMS" menu.
RGB Gain/Bias: This settings allows to configure the brightness (gain) and contrast (bias) of an
‡
image.
±
Reset: Choose "Yes" to return the factory default settings for RGB gain/bias.
±
Exit: Exit the "RGB Gain/Bias" menu.
Color Space (non-HDMI input only): Select an appropriate color matrix type from the following:
‡
AUTO, RGB, or YUV.
‡
Color Space (HDMI input only): select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), and YUV.
Signal
Adjust the signal options.
Automatic: Configure automatically the signal (the frequency and phase items are grayed out). If
‡
automatic is disabled, the frequency and phase items will appear for tuning and saving the settings.
‡
Frequency: Change the display data frequency to match the frequency of your computer's graphic
card. Use this function only if the image appears to flicker vertically.
‡
Phase: Synchronize the signal timing of the display with the graphic card. If the image appears to be
unstable or flickers, use this function to correct it.
H. Position: Adjust the horizontal positioning of the image.
‡
‡
V. Position: Adjust the vertical positioning of the image.
Note:
This menu is only available if the input source is RGB/Component.
Ultra Detail
Adjust the edges of the projected image in order to provide more perceived details.
Brightness Mode
Adjust the brightness mode settings.
‡
DynamicBlack1/ DynamicBlack2/ DynamicBlack3: Use to automatically adjust the picture
brightness in order to give optimum contrast performance.
‡
Power: Choose the power percentage for brightness mode.
35
English
Advertisement
Table of Contents
