Table of Contents
Advertisement
User's Manual
OPERATING INSTRUCTIONS
GENERAL INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons are located on the
front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to
your personal preferences.
The power cord should be connected.
•
Connect the Signal cable from the monitor to the VGA card.
•
Press the power button to turn on the monitor. The power indicator will light up.
•
Auto adjustment/ Enter
《Analog Input Models》
Input source change/ Enter
《Digital Input Models》
▼◄ [－]
Preset Mode adjustment button
▲ ► [＋]
Brightness adjustment button
Menu / Return
Power Button
Figure.4. Control Panel Buttons
12
Advertisement
Table of Contents
