6
CONTROLS
6.1
Clutch lever
6.2
Hand brake lever
6.3
Throttle grip
6.4
Kill switch
6.5
Electric starter button
The clutch lever
The clutch is hydraulically operated and self-adjusting.
H00256-10
Hand brake lever
The front brake is engaged using the hand brake lever.
H00257-10
The throttle grip
H00258-10
Kill switch
Possible states
•
Kill switch
and the engine can be started.
•
Kill switch
ning engine stops, and a non-running engine will not start.
H00259-10
The electric starter button
Possible states
•
Electric starter button
•
Electric starter button
ated.
H00260-10
is fitted on the left side of the handlebar.
is fitted on the right side of the handlebar.
is fitted on the right side of the handlebar.
is fitted on the left side of the handlebar.
in the basic position – In this position, the ignition circuit is closed
pressed – In this position, the ignition circuit is interrupted, a run-
is fitted on the right side of the handlebar.
in basic position
pressed – In this position, the electric starter is actu-
11