Husqvarna FE 250 Owner's Manual page 75

SERVICE WORK ON THE CHASSIS 12
–
Remove the seat. (
–
Remove the right side cover. (
Main work
–
Unplug connector
–
Clean plug-in connection
compressed air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
S03562-10
–
Disconnect the plug-in connection of the fuel line.
Info
Remaining fuel may flow out of the fuel hose.
–
Mount wash cap set
Wash cap set (81212016100)
–
Remove the hose from the fuel tank breather.
S03563-10
–
Remove screws
–
Hang the horn and horn bracket to one side.
H03705-10
–
Remove screw
–
Pull the fuel tank breather hose off the fuel tank lid.
H03704-10
–
Pull both spoilers laterally off the radiator and take off the fuel
tank upwards.
H03706-10
p. 65)
p. 69)
1
of the fuel pump.
2
of the fuel line thoroughly with
3
.
4
.
5
with the rubber bushing.
73