Table of Contents
Advertisement
EQUIPMENT MISUSE HAZARD
Any misuse of the equipment or accessories, such as overpressurizing, modifying parts, using
incompatible chemicals and fluids, or using worn or damaged parts, can cause them to rupture and
INSTRUCTIONS
result in splashing in the eyes or on the skin, other serious injury, or fire, explosion or property
damage.
•
This equipment is for professional use only. Observe all warnings. Read and understand all
instruction manuals, warning labels, and tags before you operate this equipment. If you are not
sure, or if you have questions about installation or operation, call your Graco distributor.
•
Never alter or modify any part of this equipment; doing so could cause it to malfunction. Use only
genuine Graco part numbers and accessories.
•
Check all equipment regularly and repair or replace worn or damaged parts immediately.
•
Never exceed the recommended working pressure or the maximum air inlet pressure stated on
your pump or in the Technical Data on page 21.
•
Do not exceed the maximum working pressure of the lowest rated component in your system. This
equipment has a 100 psi (0.7 MPa, 7 bar) maximum working pressure at 100 psi (0.7 MPa,
7 bar, ) maximum incoming air pressure.
•
Be sure that all fluids and solvents used are chemically compatible with the wetted parts shown in
the Technical Data on page 21. Always read the manufacturer's literature before you use fluid or
solvent in the pump.
•
Never move or lift a pump under pressure. If dropped, the fluid section may rupture. Always follow
the Pressure Relief Procedure on page 9 before you move or lift the pump.
•
Never use a polypropylene or PVDF pump with non-conductive flammable fluids as specified by
your local fire protection code. Refer to Grounding on page 5 for additional information. Consult
your fluid supplier to determine the conductivity or resistivity of your fluid.
•
Provide fresh air ventilation to avoid the buildup of flammable fumes from solvents or the fluid
being pumped.
WARNING
308652ZAS
3
Advertisement
Table of Contents
