Sound Alert - Motorola PIP12 TRAVEL Quick Start Manual

Connect the parent unit
1. Plug the DC plug of the power adapter into the DC jack on the side of the
parent unit and plug the other end of the AC adapter into the AC power
outlet.
2. Switch on the AC power (if your AC power outlet has a switch). The battery
charging LED indicator lights up in red and turns dim until the batteries are
fully charged when the parent unit is not powered ON.
Note
If the battery charging LED indicator flashes red when turning on the power
button, it means the battery level is low and needs recharging. During
charging, the parent unit and baby unit should not be attached together.
5. Using the digital audio baby monitor
5.1 Adjust the speaker volume on the parent unit
+ -
Press or to increase or decrease the volume. It has 5 volume levels and
mute.
5.2 Mute the speaker
-
Press continuously until the volume level changes to mute or press and hold
-
to mute the speaker. The mute / sound alert LED indicator on the parent unit
will light up in red. You can unmute it by pressing
5.3

Sound alert

When the speaker of the parent unit is muted and a loud sound is detected by
the baby unit, the mute / sound alert LED indicator will flash red.
+
and the LED turns OFF.
7