Parent Unit Settings; Set The Language; Timer; Turn On The Timer - Motorola MBP28/3 User Manual

Doc Title : Product Data – User's Guide
Model : MBP28
4

PARENT UNIT SETTINGS

4.1

Set the language

1. Press <MENU> to access main menu.
2. Press < > or < > to select LANGUAGE.
3. Press <MENU> and < > or < > to select the desired language.
4. Press <MENU> to confirm.
4.2

Timer

The timer function serves as an alarm to remind you of things-to-do for the baby such as feeding or medication,
and it can be set as a one off or a repeated time period.
4.2.1

Turn on the timer

1. Press <MENU> to access main menu.
2. Press < > or < > to select TIMER.
3. Press <MENU> and < > or < > to select Activation.
4. Press < > or < > to select On or Off.
5. If you select On, your will be prompted to select the alarm frequency from Once or Repeated.
6. Press <MENU> to confirm.
4.2.2

Set the timer

1. Repeat steps 1 to 2 in section 4.2.1.
2. Press < > or < > to select Set Timer.
3. Press <MENU> and then set the number of hours (00 to 12) using the < > or < > keys.
4. Press <MENU> and then set the number of minutes (00 to 59) using the < > or < > keys.
5. Press <MENU> to confirm the timer interval set.
NOTE
When the timer period is reached, the unit will emit an alert beep for 30 seconds and show 00:00 on the screen.
You can press any button to stop the beeps. If the timer mode was set to ONCE, the timer will be cancelled, but if
set to REPEATED, it will reset and start another timer period.
4.3

Set the brightness

1. Press <MENU> to access main menu.
2. Press < > or < > to select BRIGHTNESS.
3. Press <MENU> to enter to show the list of levels.
4. Press < > or < > to select from Level 1 to Level 5. The screen brightness changes as the options are selected.
5. Press <MENU> to confirm.
NOTE
A lower brightness level will reduce the power consumption.
4.4

Sound alert

When the sound alert is set ON, and the parent unit speaker volume is off, it will cause the parent unit to beep and
flash "Sound alert from Baby Unit x" on the display, whenever the sound at the baby unit goes above a preset
threshold.
1. Press <MENU> to access main menu.
2. Press < > or < > to select SOUND ALERT.
3. Press <MENU> and < > or < > to turn on or off the sound alert.
4. Press <MENU> to confirm.
* The parent unit beeps only if the sound level at the camera reaches the preset sensitivity level.
4.5

Alert tones

You can set the parent unit to give a warning when the battery is low and/or if the radio link to the camera unit is
lost. When activated, an alert screen will be displayed on the parent unit with an alert tone emitted simultaneously.
1. Press <MENU> to access main menu.
2. Press < > or < > to select ALERT TONES.
3. Press <MENU> and < > or < > to select Low Battery or No Link.
4. Press <MENU> and < > or < > to turn on or off the alert tone.
This document contains confidential and proprietary information of VTech Telecommunications Ltd
Revision :
Page(s) :
R.00
11 of 17