Table of Contents
Advertisement
Control reference guide
Main Unit
AC supply indicator (AC IN)
This indicator lights when the unit is
connected to the AC mains supply.
1 Standby/on switch [Í/I]
Press to switch the unit from on to
standby mode or vice versa. In
standby mode, the unit is still
consuming a small amount of power.
[ADVANCED SURROUND] (l 27)
[SUPER SOUND EQ] (l 27)
[SOUND EQ] (l 27)
[SUBWOOFER] (l 27)
Remote control signal sensor
MUSIC PORT jack (l 29)
Headphone jack (PHONES)
Deck 1 [<, OPEN] (l 25)
Deck 1 cassette holder (l 25)
[BAND, TUNER] (l 24)
[MUSIC PORT] (l 29)
[DISPLAY,jDEMO]
(l 7, see below)
[DECK 1/2] (l 25)
[¥, RECORD] (l 25, 26, 29)
Headphone jack (PHONES)
Reduce the volume and connect the headphones.
Headphone plug type: Φ3.5 mm stereo (not included)
Avoid listening for prolonged periods of time to prevent
hearing damage.
8
RQTV0141
Disc trays
Disc tray [<, OPEN/CLOSE] (l 12)
[<, MULTI CHANGE] (l 12)
[<, SINGLE CHANGE] (l 12)
Display
[11]j[51]
(disc direct play buttons) (l 12)
[jMIC VOLi] (l 26)
(\Southeast\Asia\ only)
Microphone jacks (MIC 1, 2) (l 26)
(\Southeast\Asia\ only)
Deck 2 [OPEN, <] (l 25)
Deck 2 cassette holder (l 25)
2 [jVOLUMEi] (l 12, 26)
3 [2 1, TAPE] (l 25)
4 [1, DVD/CD] (l 12, 15)
5 [∫, STOP] (l 13, 25)
6 Disc skip/search/slow-motion
play, tape fast-forward/rewind,
[:, REW/C, 9, D/FF]
tuning, time adjustment
(l 13, 24)
To select the desired display mode.
Every time you press the button:
Normal ) Peak hold ) Reflection
^------------------ Off ,------------------}
Normal
Indicates strength of the sound in each
tonal range.
Peak hold
Peak sound value of each sound range
(on display for about one second after it
occurs).
Reflection
Indicates the strength of the sound in each
tonal range (displayed in the opposite
direction of normal mode).
Advertisement
Table of Contents
