Supplied Accessories - Sony IPELA SNC-RZ30N Install Manual

in memory or recommended ATA memory
card (a "Memory Stick" inserted into a PC
card adaptor) inserted into the PC card slot
of the camera.
Preset positions and Tour
programs
You can save up to 16 preset positions (pan,
tilt and zoom positions) of the camera, and
up to 5 tour programs composed from the
preset positions. You can activate the preset
positions by synchronizing with the external
sensor input or built-in activity detection
function.
Alarm output
The camera is equipped with two sets of
alarm outputs. You can use them to control
peripheral devices by synchronizing with the
external sensor inputs, built-in activity
detection function, manual trigger button,
Day/Night function or timer.
Transparency-type RS-232C/RS-
485 interface
If you connect peripheral devices to the
camera via the RS-232C or RS-485
interface, you can control the devices from
the computer via the network and receive
data from these devices.
Analog video output
The analog video output allows connecting a
VTR or TV monitor for local image
recording and monitoring.
Image flip
By default, the images from the camera are
displayed normally when the camera is
installed on the ceiling. Using the image flip
function, you can flip the images from the
camera vertically so that they are seen in
correct way when the camera is placed
upright on the desk top.
Supplied
Accessories
When you unpack, check that all the
supplied accessories are included.
Camera (1)
AC power adaptor (1)
AC power cord (1)
USA and Canadian model
European model

Supplied Accessories

5
GB