Troubleshooting and support
If...
Cannot copy pictures from
one device to another even
though the copy destination
is not full.
Screen messages
Screen message
Create file failed.
Printer unavailable.
Unable to connect to printer.
Printing error.
Time out occurred while printing.
71
Try one or more of the following
Storage devices that have FAT (File Allocation Table) 16
formatting can only store up to 512 files in its top level folder
(root directory). To make sure all your pictures copy properly,
format the copy destination to FAT32 before copying to it:
Caution: Formatting deletes all pictures and videos,
including protected files.
1
Connect the device to your computer.
2
Open My Computer and locate the device.
3
Right-click on it and choose Format.
4
From the File system drop-down menu, choose FAT32 then
click Start.
Try one or more of the following
The device (memory card, USB drive, camera, etc.) you are
trying to copy to is protected.
I
See your device documentation to remove write
protection.
I
Insert or connect a different device.
I
Make sure your printer is on and the USB cable is
securely connected (see
I
Make sure you changed your USB connection mode
from computer to printer (see
I
Make sure your printer is on and the USB cable is
securely connected (see
I
Check your printer for more info.
I
Check cables and printer supplies. Print again.
Get other manuals https://www.bkmanuals.com
page
39).
page
40).
page
39).
www.kodak.com/go/support