❷ Mounting The Optional Board (Sold Separately) - NEC NP-PH1000U User Manual
11,000-lumen professional installation projector
Hide thumbs
Also See for NP-PH1000U:
- Manual (58 pages) ,
- Installation manual (12 pages) ,
- Quick setup manual (6 pages)
Table of Contents
Advertisement
❷ Mounting the Optional Board (sold separately)
CAUTION
Before mounting or removing the optional board, be sure to turn off the projector, wait for the fans to stop and turn
off the main power switch.
Tool needed: Phillips screwdriver (plus-head)
The SB-01HC board is used as an example.
1. Turn off the main power switch of the projector.
2. Loosen the two screws on the slot cover of the terminal panel.
Remove the two screws and the slot cover.
NOTE: Keep the two screws and the slot cover.
3. Insert the optional board into the slot.
Make sure that the board is inserted into the slot in the correct orientation.
Incorrect orientation may cause miscommunication between the optional board and projector.
213
9. Appendix
Advertisement
Table of Contents
