Part Names of the Projector
Front/Top
The lens is sold separately. The description below is for when the NP27ZL lens is mounted.
Stacking Column
Security Locking Pin
Remote Sensor (located on the
front and the rear)
(→ page 9)
Lens Release Lever/Safety Lever
(both levers are located inside the
lens shroud.)
(→ page 159)
Lens Hood
Lens Shroud
(The lens cap is attached to the
Ventilation (inlet)
Filter Cover
Adjustable Tilt Foot
(→ page 22)
Lens
Lens Cap
lens.)
Handle
4
1. Introduction
USB (LAN) Port (for optional Wire-
less LAN Unit) (→ page 168)
LED Lights (six locations)
Control Panel
(→ page 6)
Indicator Section
(→ page 6)
VOLTAGE SELECT Switch
Use this switch according to the
voltage being used.
(→ page 13)
AC Input
Connect the optional power cord's
three-pin plug here, and plug the
other end into an active wall outlet.
(→ page 13)
Slot for Power Cord Stopper (→
page 14)
Main Power Switch
Terminal Panel
(→ page 7)