Connecting Component Input - NEC NP-PH1000U User Manual

Connecting Component Input

BNC (male) to RCA (female)
adapter (not supplied)
• Select the source name for its appropriate input connector after turning on the projector.
Input connector
COMPUTER 1 IN
COMPUTER 2 IN
COMPUTER 3 IN
NOTE:
• Normally the computer signal and component signal are identified and switched automatically. If the signal cannot be identified,
however, select the signal at [ADJUST] → [VIDEO] → [SIGNAL TYPE] on the projector's on-screen menu. Select "COMPUTER" or
"VIDEO" for the Computer 3 video input connector at [SETUP] → [OPTION (1)] → [SIGNAL SELECT(COMP3)] (→ page 125).
• To connect to a video device with a D connector, use the sold separately D connector converter adapter (model ADP-DT1E).
DVD player
SOURCE button on the projector
cabinet
COMPUTER 1
COMPUTER 2
COMPUTER 3
6. Installation and Connections
15-pin - to - RCA (female) × 3 cable adapter
(ADP-CV1E)
Component video RCA × 3 cable (not supplied)
Audio Equipment
Button on the remote control
COMPUTER 1
COMPUTER 2
COMPUTER 3
165