Cleaning The Trimmer - Panasonic ER-GB370K Operating Instructions Manual

1. Apply water, facial cleanser, or shaving
cream to your face.
2. Slide the power switch to the " "
position to turn on the trimmer.
3. Cut your beard slowly from the
bottom up.
Note
Do not use facial cleanser containing scrubbing compounds
as it may cause the blade to clog.
Make sure to lubricate the blade after using it with facial
cleanser or shaving cream. (See page 13.)
Make sure to rinse the main body with water and apply the
oil to the blades after wet trimming.
12
PB013743 - ER-GB370 _(01EN)_07-22-16.indd 12

Cleaning the trimmer

Please clean after every use.
Before cleaning
1. Remove the trimmer from the AC
adaptor.
Make sure that the trimmer is
turned off.
2. Remove the comb attachment.
3. Hold the main body, place your
thumb against the blades and then
push them away from the main
body.
Cleaning with water
1. Clean the trimmer, the blade and
the comb attachment with running
water.
Rinse with water and shake
up and down several times to
remove the water.
2016/7/22 10:31:30