Parts Identification; Charging The Trimmer - Panasonic ER-GB370K Operating Instructions Manual

Parts identification

A




A
Main body
1 Trimming height indicator
2 Dial (Height adjustment
control)
3 Power switch [ / ]
: OFF
: ON
4 Appliance socket
B Blade block
5 Cleaning lever
6 Moving blade
7 Stationary blade
8 Mounting hook
PB013743 - ER-GB370 _(01EN)_07-22-16.indd 9
B
E




F
C
D
 

C Comb attachment
(1 mm (1/32˝ ) to
10 mm (13/32˝ ))
AC adaptor (RE7 - 61)
D
9 Power plug
 Charging plug
 Charge indicator
lamp
Accessories
E Oil
F Cleaning brush

Charging the trimmer

Turn the trimmer off.
Wipe off any water droplets on the appliance socket.
1. Place the trimmer on the AC adaptor.
2. Plug in the AC adaptor into a
household outlet.
Check that the charge indicator lamp glows.
Charging is completed after approx. 15 hours.
3. Disconnect the AC adaptor after
charging is completed.
The charge indicator lamp continues to
glow after charging is complete. There is no
"
indication to show that charging is complete
Charging the battery for more than 15 hours
will not affect battery performance.
Note
You cannot operate the trimmer while charging.
When charging the trimmer for the first time or when it has not
been in use for more than 6 months, the charge indicator lamp
may not glow for a few minutes, or the operating time may
shorten. Please charge it for more than 23 hours in such cases.
Recommended ambient temperature for charging is
0 °C - 35 °C (32 °F - 95 °F). Battery performance may
decrease outside of the recommended temperature.
A full charge supplies enough power for approximately
30 minutes of use.
You can charge the battery before it is completely
discharged. However, it is recommended to charge when the
battery is completely discharged. The battery life depends
strongly on factors such as how it is used and stored.
If there is crackling noise on radios or other devices while
charging, charge the clipper using a different household outlet.
"
.
9
2016/7/22 10:31:27