Cleaning The Trimmer; Cleaning With A Brush - Panasonic ER-GB42 Operating Instructions Manual

Cleaning the trimmer

It is recommended to clean after each use.
1. Remove the trimmer from the AC adaptor.
To remove light dirt
2. Remove the comb
attachment and turn the
trimmer on.
3. Run water down the
water inlet at the front
of the main body,
rinse thoroughly for
approximately 20
seconds, and then turn
the trimmer off.
Rinse with water and
shake up and down
several times to remove
the water.
Be careful not to hit the main body on the sink or any other
object while draining the water. Failure to do so may cause
malfunction.
12
中东亚洲.indb 12
To remove heavy dirt
2. Remove the comb
attachment and blade.
3. Clean the trimmer, the
blade and the comb
attachments with running
water.
Rinse with water and
shake up and down
several times to remove
the water.
4. Wipe off the water with a towel
and let it dry naturally.
It will dry faster with the blade
removed.
5. Apply the oil to the blade after
drying.
6. Attach the comb attachment and
blade to the trimmer.

Cleaning with a brush

1. Remove the trimmer from the AC adaptor.
Make sure that the trimmer is turned off.
2. Remove the comb attachment and blade.
3. Brush off any hair trimmings from
the main body and from around the
blade.
4. Brush any hair trimmings out from
between the stationary blade and
the moving blade while pressing
down the cleaning lever to raise the
moving blade.
5. Apply the oil to the blade.
6. Attach the comb attachment and blade to the trimmer.
17/4/6 下午5:52