Craftsman 12A-764M799 Operator's Manual page 22

WARninG
Before performing any type of maintenance/service, disengage all
controls and stop the engine. Wait until all moving parts have come to
a complete stop. Disconnect spark plug wire and ground it against the
engine to prevent unintended starting. Always wear safety glasses during
operation or while performing any adjustments or repairs.
interval
Each Use 1.
2.
3.
4.
5.
6.
1st 2 hours 1.
25 hours 1.
2.
3.
4.
50 hours 1.
Annually or 100 hours 1.
2.
Before Storage 1.
SERVICE AND MAINTENANCE
mAinTenAnCe SCheduLe
item
Mower blades
Loose or missing hardware
Belts
Engine oil level
Controls
Mulch plug (if fitted)
Engine oil
Engine oil
Air cleaner
Mower blades
Control linkages and pivots
Front Wheel Bearings
Spark plug
Rear Wheels
Fuel system
Follow the maintenance schedule given below. This chart describes
service guidelines only. Use the Service Log column to keep track of
completed maintenance tasks. To locate the nearest Sears Service
Center or to schedule service, simply contact Sears at
1-800-4-MY-HOME®.
Service
1. As required
2. Tighten or replace
3. Check
4. Check
5. Check for proper operation
6. Check for proper plug installation
1. Change
1. Change
2. Clean or replace
3. Sharpen and balance
4. Lube with light oil
1. Grease
1. Clean, replace, re-gap
2. Grease
1. Run engine until it stops from lack of
fuel or add a gasoline additive to the
gas in the tank.

Service Log