Advertisement
IMPORTANT: The channel timer button's multicolored
LED indicator shows the status of the timer. The
indicator has three colors: green, yellow, and red. The
LED will be green during the first 70% of the count-
down. It changes to yellow during the next 20% of the
countdown. It will be red during the final 10% of the
countdown, and will start flashing red once the time
has run out.
3. The timer will countdown from the programmed
value to zero. At zero, the display flashes End and
the alarm sounds. See figure 7.
Figure 7
End
4. When the timing cycle is complete, and the alarm
sounds, press the channel button to cancel the
alarm. See figure 7.
CLEANING
1. Do not allow grease to build up on the timer, wipe it
down daily with clean damp cloth.
IMPORTANT: Do not use abrasive or chemical cleaners
on your timer, this may cause damage to the overlay.
Printed in USA 3/06 © 2006
PART LIST
ITEM
PART NUMBER
1
69-079S
69-079S
2
740-030
740-034
3
740-067S
740-067S
740-065S
4
740-077S
5
88-653-2-4S
6
541-135
7
740-026S
740-026S
740-027S
740-027S
740-028S
740-028S
740-089S
740-089S
8
740-032
740-036
9
70-048S
70-048S
1 0
72-293-05CES
72-293-07GBS
4
DESCRIPTION
Plastic Rivet (Pkg. Of 2)
Rear Cover (T88)
Rear Cover (T44 & T66)
Main P.C. Board (T44)
Main P.C. Board (T66 & T88)
Wing Board (T88 Only)
Speaker Assy.
Speaker Shim
Switch Panel Assy. (T88)
Switch Panel Assy. (T66)
Switch Panel Assy. (T44)
Switch Panel Assy. (T66MC)
Front Cover (T88)
Front Cover (T66 & T44)
Knob W/Hardware
Power Supply
Power Supply
740-520revA
Advertisement
