Biostar I865G-M4 Setup Manual page 39

I865G-M4 BIOS Setup
Cache Setup
CPU L1&L2 Cache
Depending on the CPU/chipset in use, you may be able to increase memory
access time with this option.
Enabled (default)
Disabled
CPU Feature
Thermal Management
Allows you to choose the thermal management of your monitor.
The Choices: Thermal Monitor 1 (default), Thermal Monitor2.
TM2 Bus Ratio
Represents the frequency.
be initiated when the on-die sensor gose from not hot to hot.
The Choices: 0X (default).
TM2 Bus VID
Represents the voltage of the throttled performance state that will be initiated
when the on-die sensor gose from not hot to hot.
The Choices: 0.8375 (default).
Limit CPU ID Max Val
Set limit CPU ID maximun vale to 3, it should be disabled for WinXP.
The Choices: Disabled (default), Enabled.
Virus Warning
This option allows you to choose the Virus Warning feature that is used to protect the IDE
Hard Disk boot sector. If this function is enabled and an attempt is made to write to the
boot sector, BIOS will display a warning message on the screen and sound an alarm beep.
Enabled
Disabled (default)
CPU Hyper-Threading Technology
This option allows you to enable or disabled CPU Hyper-Threading.
Windows XP and Linux 2.4.x (OS optimized for Hyper Threading Technology.
for other OS (OS not optimized for Hyper Threading Technology.
The Choices: Enabled (Default), Disabled.
Quick Power On Self Test
Enabling this option will cause an abridged version of the Power On Self-Test (POST) to
execute after you power up the computer.
Disabled
Enabled (default)
Enable cache.
Disable cache.
Bus ratio of the throttled performance state that will
Virus protection is activated.
Virus protection is disabled.
Normal POST.
Enable quick POST.
10
Enabled for
Disabled