Headers & Jumpers Setup; How To Setup Jumpers; Detail Settings - Biostar I865G-M4 Setup Manual

CHAPTER 3: HEADERS & JUMPERS SETUP
3.1 H S
OW TO
The illustration shows how to set up jumpers.
When the jumper cap is placed on pins, the jumper is "close", if not, that
means the jumper is "open".
Pin opened
3.2 D S
ETAIL ETTINGS
JUSBV1/JUSBV2/JUSBV3_4: Power Source Headers for USB ports at
JUSB1, JUSBLAN1 & JUSB2/JUSB3
JUSBV1/JUSBV2
JUSBV3_4
1
Pin 1-2 close
1
Pin 2-3 close
Note:
In order to support this function "Power-on system via USB
device," "JUSBV1/JUSBV2/JUSBV3_4" jumper cap should be placed on
Pin 2-3 individually.
JCDIN1: CD-ROM Audio-in Connector
This connector allows user to connect the audio source from the veriaty
devices, like CD-ROM, DVD-ROM, PCI sound card, PCI TV turner card
etc..
1
I865G-M4
J
ETUP UMPERS
Pin closed
Assignment
JUSBV1: +5V for JKBMS1 and JUSB1.
+5V
JUSBV2: +5V for JUSBLAN1.
JUSBV3_4: +5V for JUSBV2/JUSBV3.
JUSBV1: JKBMS1 and JUSB1 are
+5V standby JUSBV2: JUSBLAN1 is powered with
Voltage
JUSB3_4: JUSB2/3 are powered by
Pin
1
2
JCDIN1
3
4
11
Pin1-2 closed
Description
powered by standby v oltage of +5V.
standby v oltage of +5V.
standby v oltage of +5V.
Assignment
Left channel input
Ground
Ground
Right channel input