Input Signal Selection; Regza-Link Controls; Equipment Control - Toshiba 32CV711B Owner's Manual

CONTROLS AND FEATURES

Input signal selection

This specifies the type of signal going into SCART
on the back of the television. Please refer to the
manufacturers instructions for the connected
equipment.
In the SETUP menu, press ▼ to highlight
SCART, then press ► or
SETUP
OSD Language
SCART
Automatic Power Down
Location
Software Upgrade
Parental
Reset TV
Enter
OK
Model 19/22:
Press ◄ or ► to select Auto, Mixed,
RGB, Composite, or S-Video.
SCART
SCART
Model 26/32/40:
• Press ▲ or ▼ to select SCART 1 and
press ◄ or ► to select Auto, Mixed, RGB,
Composite, or S-Video.
• Press ▲ or ▼ to select SCRAT 2 and
press ◄ or ► to select Auto, Composite,
or S-Video.
SCART
SCART 1
SCART 2
Check the signal output of the DVD or compatible
device, please select the correct setting for
"SCART input".
to enter.
English
On
Home
Select Back Exit
RETURN EXIT
Auto
Select Back Exit
RETURN EXIT
Auto
Auto
Select Back Exit
RETURN EXIT

REGZA-LINK Controls

This feature uses CEC (Consumer Electronics
Control) technology, and allows the control of
Toshiba REGZA-LINK compatible equipment
from the television's remote control.
NOTE: Not all Toshiba products currently support
REGZA-LINK.

Equipment Control

The REGZA-LINK mode on the television's
remote control allows the control of connected
REGZA-LINK equipment being watched.
To control the REGZA-LINK input source, first
select the equipment with REGZA-LINK input
source selection, then switch the mode on the
remote control to REGZA-LINK and press any
buttons.
The available functions are dependent on the
equipment connected. Not all the remote control
keys may be available. Please refer to the
operation manual for each piece of equipment
connected.
NOTE: The television features that can be
controlled by the connected equipment are:
Standby, Volume, Channel, Sound Mute, Display
Information, Number Buttons and Previous
Programme.
36