Contents SETTING UP Safety precautions – Some do’s and don’ts for you to be aware of Installation and important information The remote control – an at-a-glance guide Connecting external equipment – a guide to connecting equipment to the back of the television Front Connections and controls –...
Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety. They are of a general nature, intended to help with all electronic consumer products and some points may not apply to the goods you have just purchased.
Furthermore, under no circumstances shall Toshiba be liable for any consequential loss and/or damage including but not limited to the following, loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.
OK to confirm your selection Selectable picture preferences Widescreen viewing Stereo/Bilingual reception To operate a TOSHIBA VCR or DVD: press to put into STANDBY press to REWIND No function on this model...
Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is is no switch remove the mains plug from the wall socket. the back of your television SCART 2 (EXT2) SCART 1 (EXT1) decoder* video recorder IN/OUT A wide variety of external equipment can be...
Page 7
Front connections and controls A wide variety of external equipment can be connected via the sockets located behind the flap on the television. Press the centre of the flap to open it. Whilst all the necessary adjustments and controls for the television are made using the remote control, the buttons on the television may be used for some functions.
Selecting the language, Auto tune Before running Auto tune put your decoder and video recorder (VCR) to Standby if they are connected. To set up the television use the buttons on the remote control as detailed on page 5. To choose the required language, press MENU The search will begin for all available stations.
Page 9
Manual tune The television can be tuned-in manually using Manual tuning. For example: if the television cannot be connected to a VCR/decoder with a SCART lead. Use S and R to move across the screen and select any of these Manual Tune options. Programme Programme Search...
Manual tune continued Programme skip When your VCR signal is found, press R to move Programme skip along to Station. With P , Q, S and R put in the required Name, e.g. VCR. To prevent certain programmes from being viewed, the programme position can be skipped.
Manual fine tuning, sorting programme positions, panel lock The list of stations is now showing. With Q or P Manual fine tuning highlight the station you want to move and press OK or R . Manual fine tuning should not be required unless The selected station will be moved to the right of interference is experienced or the signal is weak.
General and sound controls, stereo/bilingual transmissions Selecting programme positions Volume correction (Z47 models only) Volume Correction helps to reduce the difference of To select a programme position use the numbered volume from one programme/channel to another. buttons on the remote control. For programme positions below 10 use 0 and the Select Volume correction from the Sound required number e.g.
Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. Press the button repeatedly to select between Super live, Cinema, Subtitle, Wide and 4:3. Please note: Whenever the MENU button is pressed the picture size setting will change while the menus are ON the screen.
Page 14
Picture controls Picture preferences Automatic format (Widescreen) When this television receives a true Widescreen picture and This television offers the choice of personalising the picture Auto format is On, it will automatically be displayed in style. Press to view the different styles available: Widescreen format, irrespective of the Picture mode-1 to 3 are preset options and television’s previous setting.
Virtual Dolby Surround ( Z47 models only Programmes with Dolby Surround (or Dolby Digital) soundtracks will be greatly enhanced by the effects of Virtual Surround from the television and connected equipment, e.g. DVD player, games console, etc. Home theatre surround systems require five or more separate speakers, this television offers the Virtual Dolby Surround option, the benefits of a five speaker system WITHOUT connecting any additional speakers.
The timer, time display, input selection and AV connections Defining the INPUT and OUTPUT sockets so The Timer that the television recognises connected equipment. See page 6 for a clear view of the The television can be set to turn itself OFF after a back connection recommendations.
With S or R choose AUTO or LIST then press EXIT. For further information on your particular text system(s), see the broadcast teletext index page or, consult your local Toshiba dealer. Feature menu Teletext AUTO Panel lock...
Teletext continued – control buttons Below is a guide to the functions of the remote control teletext buttons. To select a page whilst viewing a To display an index/initial page: normal page: AUTO Enter the page number then press , a normal Press to access index pages.
Below are the answers to some of the most common queries. For more information go to www.toshiba.co.uk Why is there a message permanently on the Why is there no sound or picture? screen? Check the mains switch is on and check all Remove it by pressing CALL.