SERVICE MODE 1. ENTERING TO SERVICE MODE 1) Press o button once on 2) Press o button again to 3) While pressing the o button, Remote Control. keep pressing. press MENU button on TV set. Item Data Mute or (Service mode display) 2.
Page 3
4. SELECTING THE ADJUSTING ITEMS 1) Every pressing of CHANNEL s button in the service mode changes the adjustment items in the order of table-2. (t button for reverse order) Refer to table-2 for preset data of adjustment mode. (See SETTING & ADJUSTING DATA on page 13) 5.
8. SELF DIAGNOSTIC FUNCTION 1) Press “9” button on Remote Control during display of adjustment menu in the service mode. The diagnosis will begin to check if interface among IC’s are executed properly. 2) During diagnosis, the following displays are shown. Indicated color of mode now selected : Green and Red Indicated color of other modes : White...
DESIGN MODE 1. ENTERING TO DESIGN MODE 2) While pressing o or CALL button on 3) Press MENU button on TV. 1) Select the Service mode. Remote and press MENU button on TV. ITEM Press DATA Press (Design mode) (Adjustment mode) When QA02 is initialized, items “OPT0”...
Page 7
28ZH37P/32ZH37P SIGNAL - SCART/VIDEO FRONT END [SHEET-1/5]...
Page 8
28ZH37P/32ZH37P SIGNAL - AUDIO PROCESSING AND MUTING [SHEET-2/5]...
Page 9
28ZH37P/32ZH37P SIGNAL - PROCESSOR AND MEMORY [SHEET-3/5]...
Page 10
28ZH37P/32ZH37P SIGNAL - VIDEO BACK-END PROCESSING [SHEET-4/5]...
Page 11
28ZH37P/32ZH37P SIGNAL - POWER SUPPLY AND REGULATION [SHEET-5/5]...