Update Scan; Single Rf Scan; Favorite Network Select; Analogue Manual Scan - Toshiba 32CV711B Owner's Manual

Update Scan

Search the new channels that are not in the
programme list.
Press MENU and press ◄ or ► to select
SETUP.
Press ▼ to highlight Channels and press
► or .
Select Update Scan and press
scanning.
Update Scan
Status: Scanning..
Digital Channels: 0 Analogue Channels: 0
NOTE: This option is available for DVB_T only.

Single RF Scan

Scan single RF channels. You can check the
Signal Strength and the Signal Quality.
Select Channels from the SETUP menu.
Highlight Single RF Scan and press ► or
to enter.
Press ◄ and ► to select the RF Channel,
then press to start scanning.
Single RF Scan
Scan single RF channel. (Digital Only)
Start Frequency (KHz)
Modulation
Symbol Rate (Ksym/s)
Signal Strength
NOTE: This option is available for DVB_C and
DVB_T only.
to start
0%
Cancel Exit
RETURN EXIT
0%
474000
Auto
6875
0
Scan Back Exit
OK RETURN EXIT

Favorite Network Select

If there are more than two networks detected
after running the Auto Scan in Channels menu,
you can select the network you prefer.
Select Channels from the SETUP menu.
Highlight Favorite Network Select and
press ► or
Auto Scan
Update Scan
Single RF Scan
Favorite Network Select
Channel Skip
Channel Sort
Channel Edit
Clean Channel List
Enter
OK
Press ▲ or ▼ to select the network you
prefer, and then press
Favorite Network Select
Please select your favorite network:
NOTE: This feature is available only for the
Country option of Norway, and with DVB_T
input source.

Analogue Manual Scan

The television can be tuned-in manually using
Analogue Manual Scan. For example: if the
television cannot be connected to a media
recorder/decoder with a SCART lead or to tune-in
a station on another System.
Press MENU and press ◄ or ► to select
SETUP.
Press ▼ to highlight Channels and press
► or .
21
TUNING THE TELEVISION
to enter.
Channels
Select Back Exit
RETURN EXIT
to set.
TVBS Network
Oslo og Akershus
Select Exit
OK EXIT