Siemens SIMATIC ET 200SP DI 8x24VDC ST Manual page 12

Properties
The module has the following technical properties:
● Digital input module with 8 inputs
● Supply voltage L+
● Sink input (PNP)
● Configurable input delay 0.05 ms to 20 ms (per channel)
● Configurable diagnostics (per module)
● Suitable for connection of switches and 2-wire sensors in accordance with IEC 61131,
type 1 and 3
The module supports the following functions:
Table 2- 1 Version dependencies of the functions
Function
Identification data I&M0 to
I&M3
Configuration in RUN
PROFIenergy
Value status
Accessories
The following accessories must be ordered separately:
● Labeling strips
● Color identification labels
● Reference identification label
● Shield connector
See also
You will find additional information on the accessories in the ET 200SP distributed I/O
system (http://support.automation.siemens.com/WW/view/en/58649293) system manual.
Digital input module DI 8x24VDC ST (6ES7131-6BF01-0BA0)
Manual, 02/2019, A5E03574157-AF
HW FW
ver- version
TIA Portal
sion
FS01 V0.0.0 V14 or higher with
and HSP 0222
higher
FS01 V0.0.0 V14 or higher with
and HSP 0222
higher
FS01 V0.0.0 V14 or higher with
and HSP 0222
higher
FS01 V0.0.0 V14 or higher with
and HSP 0222
higher
STEP 7
V5.x
V5.5 SP3 or high-
er with HSP 0229
V7.0
V5.5 SP3 or high-
er with HSP 0229
V7.0
V5.5 SP3 or high-
er with HSP 0229
V7.0
V5.5 SP3 or high-
er with HSP 0229
V7.0
Product overview
2.1 Properties
GSD file
PROFINET IO PROFIBUS DP
X X
X X
X X
X X
11