Table of Contents
Advertisement
Parameters
Input delay
Potential group
Due to the limited number of parameters of a maximum of 244 bytes per ET 200SP station with a PROFIBUS GSD
2
configuration, the parameter assignment options are restricted. The parameter length of the I/O module is 3 bytes with
PROFIBUS GSD configuration. If necessary, you can set this parameter by using the data record 128, see the appendix
"Parameter data record".
Digital input module DI 8x24VDC ST (6ES7131-6BF01-0BA0)
Manual, 02/2019, A5E03574157-AF
Value range
none
•
0.05 ms
•
0.1 ms
•
0.4 ms
•
0.8 ms
•
1.6 ms
•
3.2 ms
•
12.8 ms
•
20 ms
•
Use potential group of the
•
left module (module
plugged into a dark-
colored BaseUnit)
Enable new potential
•
group (module plugged in-
to light-colored BaseUnit)
Default
Configu-
ration in
RUN
3.2 ms
yes
Use potential
no
group of the left
module
Parameters/address space
4.1 Parameters
Scope with configuration soft-
ware, e.g. STEP 7 (TIA Portal)
GSD file
GSD file
PROFINET IO
PROFIBUS DP
Channel
Module
Module
Module
1
17
Advertisement
Table of Contents
