Removing The Antenna Cables; Prerequisites; Procedure - Dell Alienware Area-51 R4 Service Manual

Removing the antenna cables

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1. Remove the stability foot.
2. Remove the left and right side-panels. See
3. Remove the handle bars.
4. Remove the graphics card.
5. Remove the wireless card.
6. Remove the front bezel.
7. Remove the rear bezel.

Procedure

1. Disconnect the antenna cables from the wireless card.
2. Remove the gray antenna cable from the routing guide on the chassis.
1. antenna cables
3. routing guide
3. Remove the antenna cables from the routing guides on the chassis.
computer. After working inside your computer, follow the instructions in
"Removing the side panels".
2. wireless card
4. chassis
After working
www.dell.com/
113