Dubbing Files To A Disc By Connecting To A Blu-Ray Recorder - JVC GY-DS100U Detailed User Manual

Copying
Dubbing Files to a Disc by Connecting to a
Blu-ray Recorder
Videos recorded in the HD quality can be dubbed in the high-definition quality
by connecting an AVCHD-compliant Blu-ray recorder to this unit via a USB
cable. For details on creating the disc, refer to the instruction manual of your
Blu-ray recorder.
1
Open the terminal cover.
2
Insert the SD card to be dubbed.
Before inserting the SD card, close the LCD monitor and turn off the
0
power of this unit.
Insert only one SD card. Even when two cards are inserted, the Blu-
0
ray recorder only recognizes one SD card.
3
Connect to a Blu-ray recorder.
Connect using a USB cable (sold separately).
0
To DC/USB Device Terminal (Type-C)
USB Cable (Sold Separately)
To USB Connector
.
4
Open the LCD monitor.
.
The power of this unit turns on, and a USB mode screen appears.
0
.
72
Blu-ray Recorder
USB Mode
5
Perform dubbing on the Blu-ray recorder.
Refer also to the instruction manual of the Blu-ray recorder.
0
After dubbing is complete, close the LCD monitor of this unit and
0
check that the POWER/ACCESS lamp goes off before disconnecting
the USB cable. Operations cannot be performed on this unit until the
USB cable is disconnected.
Memo :
To save videos that are recorded with "Frame Rate" set to "60p"/"50p",
0
use an AVCHD Progressive-compatible Blu-ray recorder.
Caution :
Videos recorded in the 4K, High-Speed or Exchange quality cannot be
0
saved to a Blu-ray recorder.
Videos that are recorded with "Frame Rate" set to "60p"/"50p" cannot be
0
saved to a DVD.
This operation cannot be completed if the remaining battery power is not
0
enough. Charge the battery fully first.