Capturing Still Images; Zooming - JVC GY-DS100U Detailed User Manual

Capturing Still Images

Still images can be captured by tapping the B button while in the recording
standby mode.
SLOT
PLAY
.
"PHOTO" lights up on the screen when a still image is being captured.
0
.
Memo :
This camera does not have a separate mode for capturing still images.
0
The still image has the same resolution as the video image.
0
Caution :
Still image capturing during recording standby is not possible in the
0
following cases.
- When the menu is displayed
- When "System" is set to "High-Speed"
- When "System" is set to "Exchange"
- When "Rec Mode" is set to "Pre Rec" or "Time-Lapse Rec"
- When camera is connected to the network
STBY TC 00 : 00 : 00 . 00
2018 - 01 - 01
02 : 23 : 01
REC MENU

Zooming

The angle of view can be adjusted using zoom.
Memorizes the zoom position while the camera is turned off.
Use the W end (wide angle end) to shoot a wider field of view.
0
Use the T end (telephoto end) to magnify the subject for shooting.
0
W (Wide Angle End)
.
The following zoom options are available:
0
- When in the 4K mode
Optical zoom (1x to 10x)
Digital zoom (11x to 200x)
- When in the HD mode
Optical zoom (1x to 10x)
Dynamic zoom (11x to 18x)
Digital zoom (19x to 200x)
- When in the Exchange mode
Optical zoom (1x to 10x)
Dynamic zoom (11x to 18x)
Memo :
When digital zoom is used, the image becomes grainy as it is digitally
0
enlarged.
The zoom ratio range can be changed.
0
" Zoom " (A p. 96)
Recording
T
＋
VOL.
W
T (Telephoto End)
21