JVC GY-DS100U Detailed User Manual page 58

Playback
4
Tap M to select the playback mode.
SLOT
PLAY
.
5
Press the input selection button on the TV to switch to the input to the
terminal that is connected to this camera.
.
6
Select a scene (file) and tap I to start playback.
000G0000
REC
ACTION
.
Playback can also be started by tapping the thumbnail.
0
"Playing Back Videos" (A p. 51)
"Playing Back Still Images" (A p. 55)
Memo :
Change the settings in "HDMI Out" according to the connection.
0
" HDMI Out " (A p. 108)
When connected to the TV via the HDMI mini cable, images and sounds
0
may not be output properly depending on the TV connected.
In such cases, perform the following operations.
1) Disconnect the HDMI mini cable and connect it again.
2) Turn off and on this unit again.
For questions about the TV or method of connection, contact your TV's
0
manufacturer.
58
TC 00 : 00 : 00 . 00
STBY
2018 - 01 - 01
02 : 23 : 01
REC MENU
HDMI HDMI
1/8
SLOT
2018-01-01
MENU
Operating in Conjunction with TV via HDMI
Connecting this unit to an HDMI-CEC enabled TV using the HDMI mini cable
allows linked operations with the TV to be performed.
HDMI-CEC (Consumer Electronics Control) is an industry standard that
0
enables interoperability between HDMI-CEC compliant devices that are
connected via HDMI cables.
Memo :
Not all HDMI control devices comply with the HDMI-CEC standard. The
0
HDMI control function of this unit will not work when connected to these
devices.
This unit is not guaranteed to operate with all HDMI-CEC enabled devices.
0
Depending on the specifications of each HDMI-CEC enabled device,
0
some functions may not work with this unit. (For details, refer to the
instruction manual of your TV.)
Unintended operations may occur with some connected devices. In these
0
cases, set "HDMI Control" to "Off".
" HDMI Control " (A p. 108)
Preparations
Connect an HDMI mini cable between this unit and the TV.
0
"Connecting via the HDMI Mini Connector" (A p. 57)
Turn on the power of the TV and configure the HDMI CEC setting to "On"
0
(refer also to the instruction manual of the TV in use).
Set "HDMI Control" in the A/V Set menu to "On".
0
" HDMI Control " (A p. 108)
Operation Method 1
1
Turn on this unit.
2
Select the playback mode.
TV turns on automatically and switches to HDMI input mode when
0
this unit is turned on.
Operation Method 2
1
Turn off the TV.
This unit turns off automatically.
0
Memo :
Depending on the TV connected, the display language of this unit will
0
automatically switch to the language that is selected for the TV when this
unit is turned on.
(Applicable only when the display language selected on the TV is
supported by this camera) To use a display language different from that
used on the TV, set "HDMI Control" to "Off".
The display language of the TV will not switch automatically, even if the
0
display language of this unit is changed.
These functions may not work correctly when devices such as amplifier
0
and selector are connected. In such cases, set "HDMI Control" to "Off".
If HDMI-CEC does not work properly, turn off and on this unit again.
0