Advertisement
7 Adjusting Special Harvester for User
7.1.2
Fitting and Adjusting the Connecting
Cable
The connecting cable can be fitted and adjusted
to suit the user's height, different cordless prod‐
ucts and the application.
1
2
2
The connecting cable can be secured in position
by the guide (1) on the harness and the fasten‐
ers (2), or on the side of the backplate with the
fasteners (2).
3
The length of the connecting cable can be adjus‐
ted by making a loop on the battery (3) or at one
side (4).
► Fit the connecting cable so that has no kinks
and is as short as possible without hindering
your work.
7.1.3
Fitting and Adjusting the Carrying Sys‐
tem
► Put the battery on your back.
► Close buckle (2) on the waist belt.
► Close buckle (1) on the chest strap.
0458-025-9901-A
2
2
4
1
2
► Tighten the straps until the waist belt fits
snugly on your hips and the back padding is
against your back.
► Thread the end of the waist belt through the
loops (3 and 4).
7.1.4
Removing the Carrying System
► Loosen the straps.
► Open the buckles on the chest strap and waist
belt.
► Take the battery off your back.
7.2
Using with AP Belt Bag with
Connecting Cable
7.2.1
Attaching "AP Belt Bag with Connect‐
ing Cable"
1
2
► Open the hook and loop fastener on the strap
(1) and pull the strap (1) out of the ring (2).
► Thread the strap (1) through the belt (3).
3
1
► Thread the strap (1) through the ring (2) and
back through the belt (3).
► Close the hook and loop fastener (1).
English
3
4
1
3
1
25
Advertisement
Chapters
