Table of Contents
Advertisement
Installation Overview
• Mounting screws (x4) M4 x 6mm
Tip
Warning
Warning
To mount the access point on a wall or other flat surface, follow these steps:
Step 1
Attach the mounting brackets to the bottom of the access point.
Figure 2: IW9165E Mounting Brackets
1
When choosing a location for wall-mounting an access point, consider cable limitations and wall structure,
and consider suitable antenna location ahead of time.
Read the wall-mounting instructions carefully before beginning installation. Failure to use the correct hardware
or to follow the correct procedures could result in a hazardous situation to people and damage to the system.
Statement 378
A minimum of 1 inch clearance is required on all sides of the device except for the side mounted against the
wall or DIN rail, to allow for proper air flow.
Mounting brackets
Mounting on a Wall
Installation Overview
3
Advertisement
Table of Contents
