Enable System Installation From Usb - Canon Colorado 1650 Operation Manual

Enable system installation from USB

Introduction
Installation from a USB key is used by the Service technician for system installation or
reinstallation. For security reasons related to USB, it is possible to disable installation from USB.
Procedure
1. Open the settings editor.
2. Click on [Configuration] →[Security].
3. Click on the value next to [Install system from USB].
A window opens.
4. Select [Always], [Never], or [Only next start] according to the customer security policy, and click
on [Ok].
Chapter 8 - Configure the network and security settings
Enable system installation from USB
303