Installation Instructions - GE JKP85 Installation Instructions Manual

Installation Instructions

A
Cutout for Built-In Oven W/Microwave
Allow 7/8"
for overlap of
oven over side
edges of cutout
Allow a minimum of 20"
for clearance to adjacent
corners, drawers, walls, etc.
when doors are open
20"
If the cabinets do not have a solid bottom, then
two braces or runners must be installed to
support the weight of the oven. The runners
and braces must support 275 pounds.
24"
18"
27"
CABINET 10"
WIDTH
27"
CUTOUT
WIDTH
25" MIN.
25 1/4" MAX.
2" x 4"
or
equivalent
runners
Allow 1" for
overlap of oven
top and bottom
of cutout
2" x 4" or
Equivalent
Runners
NOTE: If using equivalent
runners, then the center of
the equivalent runners
should be 20 1/2".
JUNCTION BOX
LOCATION
CUTOUT
HEIGHT
48"
41 1/8" MIN.
To bottom
41 1/4" MAX.
of junction box
Alternate
junction box
location
5"
Recommended
cutout location
from floor
21 5/8"
NOTE: If the cabinet does not have
a front frame and the sides are less
than 3/4" thick, shim both sides
equally to establish the cutout
width.
5
Cabinet Width 27"
Recommended
Cutout Location
From Floor ..... 21 5/8"
Cutout Depth . 23 1/2"
Cutout Width .. 25 " Min.
........................ 25 1/4" Max.
Cutout Height 41 1/8" Min.
........................ 41 1/4" Max.
Overall Height 41 5/8"
Overall Width .. 26 5/8"