Panasonic MC-CG710 Series Operating Instructions Manual page 17

If the problem remains after checking.
• During operation, the temperature of the Vacuum Cleaner body, Supply Cord and Supply Cord Plug may increase to a certain
degree. This is not abnormal.
.
Safety device /
• When the safety device is activates
The safety device trips and the motor stops in order to prevent overheating of the motor when the Vacuum Cleaner is
operated continuously with a full Cloth Dust Bag, when garbage is clogging the nozzle or Hose or when the Vacuum Cleaner
is operated for long periods with an obstructed intake or exhaust.
• What to do...
Empty the Cloth Dust Bag or remove the obstruction in the nozzle or Hose.
• When to use again...
Wait about 60 minutes (depends on the surrounding temperature).
The safety device will reset and you can use the Vacuum Cleaner again.
Return the Vacuum Cleaner (with the Hose, Extension Wand and Floor Nozzle) to the
store where you purchased it. Do not attempt to repair it by yourself.
.
/
17
•
•