TRENDnet Web Smart Switch Series User Manual page 12

TRENDnet User's Guide
Diagnostic LEDs
•
Power LED
On : When the Power LED is on, the device is receiving power.
: When the Power turns off, the power cord is not
Off
connected or the device is not receiving power.
•
Gigabit Ethernet Port LEDs (1-28)
•
Link/Activity
Green : When the Green LED is on, the respective port is
on connected to a 1Gbps Ethernet network.
Amber : When the Green LED lights on, the respective port is
on connected to a 10/100Mbps Ethernet network.
Green : When the LED is blinking green, the port is transmitting or
Blinking receiving data on the network at 1Gbps speed.
Amber : When the LED is blinking amber, the port is transmitting
Blinking or receiving data on the network at 10/100Mbps speed.
Off When the LED is off, the respective port is disconnected.
© Copyright 2023 TRENDnet. All Rights Reserved.
•
SFP Slots (25F-28F)
•
Link/Activity
Green on : When the SFP LED is on, the link established using
the SFP module is operating at 1Gbps speed.
Green blinking : When the SFP LED is blinking, the port is
transmitting or receiving data on through the
1Gbps link established.
When the SFP LED is on, the link established using
Amber on
the SFP module is operating at 100Mbps speed.
Amber blinking When the SFP LED is blinking, the port is
transmitting or receiving data on through the
100Mbps link established.
Off No link established.
Web Smart Switch Series
7