Table of Contents
Advertisement
We recommend that you keep the packaging and the transit bolts for any
movement of the appliance.
5.4 Positioning and levelling
F
G
1. Install the appliance on a flat hard floor.
2. Loosen or tighten the feet to adjust the
level.
x4
6. Remove the three bolts, the hose
holders and plastic spacers by using the
spanner supplied with the appliance.
7. Close the holes with the plastic caps
you find in the user manual bag. Put the
smallest cap F in upper hole and the two
bigger caps G in lower holes.
WARNING!
Make sure that carpets do not
stop the air circulation below
the appliance.
Bring the appliance near the
furniture recess before
levelling it. For more details,
refer to paragraph "Building
in".
A correct adjustment of the
appliance level prevents the
vibration, noise and the
movement of the appliance
when in operation.
ENGLISH
11
Advertisement
Table of Contents
