Husky HOTC8010BB1S Use And Care Manual page 8

Assembly (continued)
9
Tightening the side locker
□ Open the door of the side locker (O).
□ Tighten all the bolts inside the panel by using a
screwdriver.
O
11
Installing the shelf brackets
□ Install the four shelf clips (P) for a shelf (Q) inside the
locker area at the desired shelf height location.
□ Ensure all shelf clips are aligned horizontally and
properly seated in the slots.
10
C
E
12
P
Q
P
8
Installing the brackets on side locker
NOTE: The holes in the cabinet are tapped and do not
require nuts.
□ Attach the brackets (C) to the back of the product to secure
the side locker (O) to the top chest (B) and rolling cabinet (E).
Place the brackets over the holes and secure with four
screws (DD) per bracket.
□ Tighten all screws securely with a screwdriver.
B
Installing the shelf
□ Install the shelf (Q) inside the locker area so that it sits on
top of the four shelf clips (P) flush and level.
C
DD
O