Arm/Disarm Temperature Alerts; Temperature Alert Sounds; Temperature Trend Indicators - La Crosse Technology S84193 Instruction Manual

OUTDOOR HIGH alert will flash. Press the ARROW buttons to set the alert value, and

press the ALERT button to confirm. Then press the ALERT button again switch to
OUTDOOR LOW setting.
OUTDOOR LOW alert will flash. Press the ARROW buttons to set the alert value, and

press the ALERT button to confirm. Then press the ALERT button again switch to
INDOOR HIGH setting.
INDOOR HIGH alert will flash. Press the ARROW buttons to set the alert value, and

press the ALERT button to confirm. Then press the ALERT button again switch to
INDOOR LOW setting.
INDOOR LOW alert will flash. Press the ARROW buttons to choose the value, and

press the ALERT button to confirm and exit.
Note: After selecting temperature alert values use the next step to turn individual alerts ON or OFF.

Arm/Disarm Temperature Alerts

In normal time mode, press and release the ALERT button to toggle between:

Press the UP ARROW button to arm the selected alert. The alert icon

activated.
Press the DOWN ARROW button to disarm the selected alert. OFF will show on the Temp Alerts area.


Temperature Alert Sounds

When temperature alert sounds, the corresponding alert icon

The alert beeps once every minute, until the temperature is out of alert range.

Press any button to stop alert. The alert symbol

Disarm Alert: In normal mode, hold and release the ALERT button to select the alert to disarm. With HI or LO

alert selected, press the DOWN ARROW button disarm alert. OFF will show when the alert is disarmed.
Temperature/Humidity Trend Indicators
The indoor and outdoor temperature trend indicators will update every 30 minutes or less. These trends
represent temperature changes over the past three hours.
Temperature rose more than 2°F /1°C in the past three hours.
Humidity rose more than 3% RH in the past three hours
Temperature has not changed more than 2°F /1°C in the past three hours. Humidity has not changed
more than 3% RH in the past three hours.
Temperature fell more than 2°F /1°C in the past three hours. Humidity fell more than 3% RH in the past
three hours
appears when each alarm is
will flash.
will still show.
8