Honda ACCORD HYBRID 2019 Owner's Manual page 499

■
CMBS TM On and Off
Left Selector
Wheel
Safety Support Switch
When you turn the CMBS TM on and off, do the
following.
1. Press the safety support switch.
2. Roll the left selector wheel to the
symbol and push it.
u The message appears on the driver
information interface when the system
becomes on or off.
The CMBS TM is turned on every time you turn
on the power system, even if you turned it off
the last time you drove the vehicle.
uuHonda Sensing®uCollision Mitigation Braking System
1Collision Mitigation Braking System
The CMBS TM may automatically shut off, and the
safety support indicator (amber) will come and stay
on under certain conditions:
2 CMBS TM Conditions and Limitations P. 498
When the CMBS
operate even if the accelerator pedal is partially
depressed. However, it will be canceled if the
accelerator pedal is deeply depressed.
The Vehicle Stability Assist® (VSA®) system, Vehicle
Stability Assist® (VSA®) OFF, adaptive cruise control
(ACC) with low speed follow (LSF), safety support,
and low tire pressure/TPMS indicators may come on
in amber along with a message in the driver
information interface when you set the power mode
to ON after re-connecting a 12-volt battery.
Drive a short distance at more than 12 mph (20 km/h).
Each indicator should go off. If any do not, have your
vehicle checked by a dealer.
Continued
TM (CMBS
TM (CMBS TM )
TM is activated, it will continue to
TM )
497