Honda ACCORD HYBRID 2019 Owner's Manual page 123

Message
• Appears if there is a problem with the auto high-
beam.
• Appears if anything covers the radar sensor cover
and prevents the sensor from detecting a vehicle in
front.
• May appear when driving in bad weather (rain,
snow, fog, etc.)
• Appears if the temperature inside the front sensor
camera is too high and some driver assist systems
cannot be activated.
• Appears if the area around the front sensor camera
is blocked by dirt, mud, etc. and be prevented from
detecting a vehicle in front.
• May appear when driving in bad weather (rain,
snow, fog, etc.)
uuIndicatorsuDriver Information Interface Warning and Information Messages
Condition Explanation
• Manually operate the headlight switch, and have your
vehicle checked by a dealer.
• If you are driving with the high beam headlights when
this happens, the headlights are changed to low beams.
• When the radar sensor gets dirty, stop your vehicle in a
safe place, and wipe off dirt using a soft cloth.
• Have your vehicle checked by a dealer if the message
does not disappear even after you clean the sensor cover.
2 Radar Sensor P. 539
2 Honda Sensing® P. 491
• Use the climate control system to cool down the camera.
• Disappears - The camera has been cooled down and
the systems are activated normally.
2 Front Sensor Camera P. 537
2 Honda Sensing® P. 491
2 Auto High-Beam P. 195
• When the front window gets dirty, stop your vehicle in
a safe place, and wipe it off with a soft cloth.
• Have your vehicle checked by a dealer if the message
does not disappear even after you cleaned the area
around the camera.
2 Front Sensor Camera P. 537
2 Honda Sensing® P. 491
2 Auto High-Beam P. 195
Continued 121